AT&T PARTNER Plus Communications System Release 3 manual Specifications, Capacities System

Specifications

Capacities System

■12 outside lines via line jacks on two 206 plus two 400 modules

■24 extensions via extension jacks on four 206 modules

■1 loudspeaker paging system via PAGE jack on processor module

■1 audio source via MUSIC ON HOLD jack on processor module (RCA phono plug required)

■1 call reporting device via SMDR jack on processor module (355A/F adapter required)

■2 doorphones via 2 ext. jacks

206Module

■2 outside lines

■6 extensions

400 Module

4 outside lines

Extension Jack

■Maximum 2 devices per extension jack, total REN on jack not to exceed 2.0* (System phone REN: 0.0 (zero))

■No more than one system phone per jack

For programming, a system display phone must be connected to extension 10 or 11.

Dimensions	■	Processor Module
and Weights	■	206 module
(approx.)	■	400 module
	■	Backplane & cover
	■ MLS-34D		phone
	■ MLS-18D		phone
	■ MLS-12D		phone
	■ MLS-12 phone
	■ MLS-6 phone
	■	MLC-6 phone
	■	MLS-CA24 Autodialer

11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm 11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm 11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm 12"(D) x 19"(H) x 11"(W) or 30.5 x 48.3 x 27.9 cm 9.7"(D) x 5.3"(H) x 10"(W) or 24.6 x 13.5 x 25.4 cm 9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm 9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm 9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm 9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm 9.4"(D) x 3.4"(H) x 7"(W) or 23.9 x 8.6 x 17.8 cm

9.7"(D) x 5.3"(H) x 3.4"(W) or 24.6 x 13.5 x 8.6 cm

4.0lbs or 1.8 kgs

4.5lbs or 2.0 kgs

4.0lbs or 1.8 kgs

5.5lbs or 2.5 kgs

3.1lbs or 1.4 kgs

2.8lbs or 1.3 kgs

2.8lbs or 1.3 kgs

2.7lbs or 1.2 kgs

2.7lbs or 1.2 kgs

2.8lbs or 1.3 kgs

1.3lbs or 0.6 kgs

Switch Fabric ■ Full digital, nonblocking

Electrical ■ Specifications ■

■

■

■

10 Watts (35 BTUs/hour) per 400 module, normal and maximum power consumption 65 Watts (225 BTUs/hour) per 206 module during normal operation

100 Watts (350 BTUs/hour) per 206 module during maximum power consumption

4 Amps maximum current at full system capacity (processor module and four 206 modules) On a PARTNER Plus 220V System: 2.2 Amps maximum current

4-day memory backup (96 hours)

Processor ■ 68000 microprocessor, 64K RAM, 256K ROM

Module

Specifications

Extension ■ Ringing voltage: +5VDC, -140 VDC peak to peak; trapezoidal wave shaping

JackOn a PARTNER Plus 220V System: +5VDC, -150 VDC peak to peak

Specifications ■ 35- to 38-Volt talk battery

■Ringing frequency: 20 Hz

PAGE Jack ■ Draws current on inner wire pair

Specifications ■ Provides contact closure on outer wire pair

■600 Ohm impedance

*The two devices combined on an extension jack can be a system phone with a standard device, or two standard devices; DO NOT connect two system phones to the same extension jack. If a device lists two RENs, use the higher number when adding up RENs.

20Specifications