IMPORTANT SAFETY INSTRUCTIONS
To reduce risk of injury from fire or electric shock, always follow bask safety precautions when using this product.
The safety symbol (exclamation point inside a triangle) on the Attendant
ConnecT/R alerts you to the Important operat- ing and maintenance instructions below.
1.Read and understand all instructions in this Owner's Manual.
2.Observe all warnings and instructions marked on the product.
3.Unplug this product from wall outlets and telephone jacks before cleaning. Clean exposed parts with a soft, damp cloth. Do not use liquid or aerosol cleaners, and never immerse in water.
4.Do not use the product near water or when you are wet. For example, do not use it in a wet basement or near a swimming pool, bathtub, shower, sink, or laundry tub. If the product comes in contact with any liquids, unplug the power and line cords immedi-
ately. Do not plug the product back in until it has been dried thoroughly.
5.Install this product securely on a stable surface. Damage may result if the product falls.
6.Install this product in a protected location where no one can step on or trip over power and line cords. Do not place objects on the cords that may cause damage or abrasion.
7.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. Do not overload wall outlets, as this can result in the risk of fire or electric shock.
8.Never push objects of any kind into this product through housing openings because they may touch dangerous voltage points or short out parts, resulting in possible fire or electric shock.
9.If this product does not operate normally, see the Troubleshooting section of this
