VS482 User Manual
Switch Mode Commands
See Switch Mode, page 12 for more information about the Switch Mode feature.
In addition, the Go To function enables the VS482 to switch to the next port with a powered on source device when the current input source is off.
The formula for Switch Mode commands is as follows:
Switch Command + Input Command + Port Number + Control + [Enter]
1.For example, to enable auto switching for port 02, type the following: swmode i02 auto [Enter]
2.To enable the auto switch next mode, type the following: swmode next [Enter]
3.To turn auto switching off, type the following: swmode default [Enter]
4.To enable the Go To function, type the following: swmode goto on [Enter]
18