ATEN Technology 4-port dual hdmi switch CEC Commands, Control, cec port1 [enter], CEC Command + Control (Off / Auto / Port1) [Enter]

Chapter 3. Operation

CEC Commands

Consumer Electronics Control (CEC) allows interconnected HDMI devices to communicate and respond to one remote control. The formula for CEC mode selection commands is as follows:

CEC Command + Control (Off / Auto / Port1) [Enter]

For example, to use the Port1 CEC setting, type the following:

cec port1 [enter]

The following tables show the possible values and formats for the Control command:

		Command			Description
		cec		Enable CEC selection
		Control			Description
		off		Disable CEC (default)
		auto		Apply the video source’s CEC to
				all display output
		port1		Apply the video source’s CEC
				only to port 1
The following table shows the available command list:
	Command	Control	Enter		Description
	cec	off	[Enter]		CEC off (default)
	cec	auto	[Enter]		Connect the video source’s CEC with all
					display output
	cec	port1	[Enter]		Apply the video source’s CEC only to port
					1

21