VS482 User Manual

OSD Setting

Use this screen to configure the VS482 OSD settings.

1.Use the drop-down menu to select which display mode the VS482 uses to display information in the upper left corner of the screen. Options are as follows.

ŠChannel - This shows the source port number.

ŠFull - This shows the source port number and source type. See Input Setting Menu, page 28 for the list of source types.

ŠOff - There is no information shown.

2.Select the visibility of the OSD menu when it is invoked. Press the menu button to enter the adjustment menu. Press the up/down button to select increase/decrease the value then press the setup button to adjust. The value 100 shows a fully visible and opaque OSD menu. The default value is 75.

Note: The Transparency value must be divisible by 5 (i.e., 5, 10, 15, 20...

and so on).

30