ATEN Technology 4-port dual hdmi switch Verification, Command OK, Command incorrect, Powering Off and Restarting

VS482 User Manual

Verification

After entering a command, a verification message appears at the end of the command line as follows:

ŠCommand OK - indicates that the command is correct and successfully performed by the switch

ŠCommand incorrect - indicates that the command has the wrong format and/or values.

Powering Off and Restarting

If you power off the VS482, follows these steps before powering it on again:

1.Power off the attached devices.

2.Unplug the power adapter cable from the VS482.

3.Wait 10 seconds, and then plug the power adapter cable back in.

4.After the VS482 is powered on, power on the attached devices.

26