OSD Operation
(F3 SET: continued)
Setting | Function |
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or the |
MODE | Port Number plus the Port Name (PORT NUMBER + PORT |
| NAME). The default is PORT NUMBER + PORT NAME). |
|
|
SCAN | Determines how long the focus dwells on each port as it cycles |
DURATION | through the selected ports in Auto Scan Mode (see F7 SCAN, p. |
| 38). Key in a value from 1 - 255 seconds, then press [Enter]. |
| Default is 5 seconds; a setting of 0 disables the Scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Skip Mode (see |
MODE | F5 SKP, p. 36), and Auto Scan Mode (see F7 SCAN, p. 38). |
| Choices are: |
| ALL - All the Ports which have been set Accessible (see SET |
| ACCESSIBLE PORTS, p. 34); |
| QUICK VIEW - Only those Ports which have been set Accessible |
| and have been selected as Quick View Ports (see SET QUICK |
| VIEW PORTS, p. 34); |
| POWERED ON - Only those Ports which have been set |
| Accessible and are Powered On; |
| QUICK VIEW + POWERED ON - Only those Ports which have |
| been set Accessible and have been selected as Quick View Ports |
| and are Powered On. The default is ALL. |
|
|
SCREEN | If there is no input from the console for the amount of time set |
BLANKER | with this function, the screen is blanked. Key in a value from |
| 1 - 30 minutes, then press [Enter]. A setting of 0 disables this |
| function. The default is 0 (disabled). |
|
|
HOTKEY | Enables / Disables the Hotkey Command function in case a |
COMMAND | conflict with programs running on the computers occurs. |
MODE |
|
|
|
31
