ATEN Technology CL-1208 F4 ADM continued, Table continues on next page, Setting, Function

CL-1208 / CL-1216 User Manual

(F4 ADM: continued)

Setting	Function
SET QUICK	This function lets the Administrator select which Ports to include
VIEW PORTS	as Quick View ports.
	w To select/deselect a port as a Quick View Port, use the
	Navigation Keys to move the highlight bar to it, then
	press the [Spacebar].
	w When a port has been selected as a Quick View Port, an
	arrowhead displays in the QV column of the LIST on the Main
	Screen to indicate so. When a port is deselected, the
	arrowhead disappears.
	w If one of the Quick View options is chosen for the LIST view
	(see F2 LIST, p. 29), only a Port that has been selected here
	will display on the List.
	w If one of the Quick View options is chosen for Auto Scanning
	(see SCAN/SKIP MODE, p. 31), only a Port that has been
	selected here will be Auto Scanned.
	The default is for no ports to be selected.
SET	This function allows the Administrator to define User access to the
ACCESSIBLE	computers on the installation on a Port-by-Port basis.
PORTS
	For each User, select the target Port; then press the [Spacebar] to
	cycle through the choices: F (Full access), V (View only), or blank.
	Repeat until all access rights have been set, then press [Enter].
	The default is F for all users on all ports.
	Note: A blank setting means that no access rights are granted.
	The port will not show up on the User’s LIST on the Main Screen.

(Table continues on next page)

34

2005-04-26