| OSD Operation |
(F4 ADM: continued) | |
|
|
Setting | Function |
RESET | If you change the position of one of the Stations in the daisy |
STATION IDS | chain, the OSD settings will no longer correspond to the new |
| situation. This function directs the OSD to rescan the Station |
| positions of the entire installation and updates the OSD so that |
| the OSD Station information corresponds to the new physical |
| layout. |
| Note: Only the Station Numbers get updated. Except for the Port |
| Names, all Administrator settings (such as Set Accessible Ports, |
| Set Quick View Ports, etc.), for all of the computers affected by |
| the change, have to be manually redone. |
|
|
FIRMWARE | In order to upgrade the |
UPGRADE | Chapter 31), you must first enable Firmware Upgrade Mode with |
| this setting. |
| When you bring up this menu, the current firmware version levels |
| display. Select Y to enable Firmware Upgrade Mode, or N to |
| leave this menu without enabling it. |
|
|
SET PS/2 CLK | Select the target computer from the list, then use the spacebar to |
MODE | cycle through the choices: |
| 0 PS/2 CLK delay = Off; ASIC filter = On |
| 1 PS/2 CLK delay = On; ASIC filter = Off |
| 2 PS/2 CLK delay = Off; ASIC filter = Off |
| The default is 0. Unless a computer is experiencing problems, we |
| recommend this setting. If you experience a problem with DELL |
| Server 1655MC computers, select setting 1. |
SET CONSOLE This setting selects which consoles (internal/external) are enabled:
MODE
0Both consoles enabled
1LCD console only
2External console only
Use the spacebar to cycle to the choice you want. The default is 0.
35
