4. OSD Operation
OSD Navigation
To dismiss the menu, and deactivate the OSD, Click the X at the upper right corner of the OSD Window; or press [Esc].
To move up or down through the list one line at a time, Click the Up and Down Triangle symbols (ST) or use the Up and Down Arrow Keys. If there are more list entries than there is room for on the Main Screen, the screen will scroll.
To move up or down through the list one screen at a time, Click the Up and Down Arrow symbols (ÏÐ), or use the [Pg Up] and [Pg Dn] keys. If there are more list entries than there is room for on the Main Screen, the screen will scroll.
To bring the KVM focus to a port,
Note: 1. If you try to access a computer that has been designated as private (see PRIVATE MODE, page 23), a message appears to inform you that the Port is in Private Mode. In this case, the screen is blank, and the port can neither be viewed, nor accessed.
2.If you try to access a computer that is already being accessed by another Console, a message displays to inform you that the Port is In Use. The target computer's screen can be viewed, but you cannot give it any input until the Console that already has control stops accessing it.
3.In a cascaded installation, if a computer attached to a Second Stage swtich is already being accessed by the other Console, that computer and all the other computers attached to the same Second Stage unit are considered to be in use. None of them can be viewed or accessed from your Console. This is so, because accessing any one computer attached to a Second Stage unit ties up the entire
After executing any action, you automatically go back to the menu one level above.
17