4. OSD Operation

F3: LIST

This function lets you broaden or narrow the scope of which ports the OSD lists. This will be different for each Console, depending on the choices made for that Console. The choices and their meanings are given in the table, below:

Choice

Meaning

 

 

ALL

Lists the Port Numbers and Names (if names have been

 

specified - see F2: EDIT, page 18), of all the ports on the

 

installation.

 

 

QVIEW

Lists only the ports that have been selected for Quick View

 

scanning (see F7: QV, page 24).

 

 

POWERED ON

Lists only the ports that have their attached computers

 

Powered On.

 

 

POWERED ON +

Lists only the ports that have been selected for Quick View

QVIEW

scanning (see F4: SCAN, page 20), and that have their

 

attached computers Powered On.

 

 

QVIEW + NAME

Lists only the ports that have been selected for Quick View

 

scanning (see F7: QV, page 24), and have been assigned

 

names (see F2: EDIT, page 18).

 

 

NAME

Lists only the ports that have been assigned names (see F2:

 

EDIT, page 18).

 

 

Double-click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the choice to indicate that it is the currently selected one.

Note: 1. You can access any port on any list by double-clicking it, or using the navigation keys then pressing [Enter].

2.If you select a port that does not have a computer attached to it, or if the attached computer is powered Off, the OSD will still switch to it, and will not show an error. To recover, press the OSD Activation Hotkey (see OSD Overview, page 15).

19