4. OSD Operation

F5: ADM

F5 allows an Administrator to configure the OSD operation of the Console. To change a setting double-click it; or use the up and down arrow keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices for you to select from appears. Double-click the choice you want, or move the highlight bar to then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting

Function

 

 

SET ACCESS

This function is used to set the timeout value to control the

TIMEOUT

release of access rights to a computer. If the original Console

 

doesn?t access the computer before the timeout value is

 

reached, the computer becomes available to the other

 

Console. To set the timeout value, key in a number from 1 -

 

255 seconds, and then press [Enter]. If the number is 0, this

 

function is disabled. The default is 2 seconds.

 

 

CLEAR THE NAME

This function clears the port name list.

LIST

 

 

 

RESTORE DEFAULT

This function is used to undo all Administrator changes and

VALUES

return the setup to the original factory default settings except

 

for the Names that were assigned to Ports, which are saved.

 

 

RELEASE ALL

Releases all Ports that have been set to Private Mode (see

PRIVATE

PRIVATE MODE, page 23), so that they become accessible

 

to all Consoles.

 

 

21