KA9233 User Manual

Display Duration

Display Duration determines the length of time that the Port ID displays on the screen after a port change. The table below explains the choices:

Choice

Meaning

 

 

Always On

Displays the Port ID at all times.

 

 

User Defined

Enter a display duration of 1–240 seconds. Enter 0 (zero) to

 

disable the Port ID display function. The default is 3 seconds.

 

 

Set Scan

Select the ports that are viewed under Auto Scan mode and the duration of time that they receive the KVM focus.

Setting

Function

 

 

Scan Timer

Determines how long the KVM focus dwells on each port as it

 

cycles through the selected ports in Auto Scan mode (see F7

 

SCAN in the matrix KVM switch user manual). Enter a value from

 

0–240 seconds. The default is 5 seconds. Entering 0 will cause the

 

KA9233 to automatically enter Skip mode when Auto Scan mode

 

is invoked.

 

 

Scan Mode

Selects which computers will be accessed under Auto Scan mode

 

(see Skipping and Scanning Attached Computers, page 23).

 

Choices are:

 

Personal—Some console modules have the option to scan only

 

those ports that the user has set as Personal. The KA9233 does

 

not support this feature. If you set the Scan Mode as Personal, the

 

KA9233 will instead scan all accessible ports. However, when

 

using a console module that supports this feature, only ports that

 

have been set as Personal will be scanned. (See SET PERSONAL

 

VIEW in the matrix KVM switch user manual.)

 

Accessible—Only those ports that the user is permitted to access.

 

See Managing Port Access, page 58.

 

Accessible + Powered—Only those ports that the user is

 

permitted to access and that have their attached computers

 

powered on.

 

The default is Accessible + Powered.

 

 

1.Choose the settings you wish, and then click Save.

2.To exit without saving changes, click any other menu or icon.

26