KA9233 User Manual

ŠClick View Only to allow the IP Installer to be used to view the IP address, subnet mask, and gateway for the matrix KVM switch.

ŠClick Disabled to restrict the IP Installer from being used to view or change the network settings for the matrix KVM switch.

IP Address

You can manually enter a static IP address or use a DHCP server to dynamically assign an IP address.

To use a DHCP server to assign an IP address:

1.Under DHCP Enabled, click Yes to use a DHCP server. To manually assign an IP address:

1.Under DHCP Enabled, click No.

2.In the fields under Manual IP Address, enter the IP address, subnet mask, default gateway, and primary DNS server. You also can enter an alternate DNS server; however, it is not required.

Note: If you use a DHCP server to assign an IP address to the matrix KVM switch, you should also enable Mail Notification so that you will be notified whenever the IP address changes.

Port Settings

Enter the network ports that the matrix KVM switch will use to transfer Webpages and communicate with clients that access the KM0832 Administrator Utility. Typically, Port 80 is used for Hyper Text Transfer Protocol (HTTP) communications, while Port 443 is used for HTTPS (HTTP over Secure Socket Layer).

Note: You must assign a port number for each field. Otherwise, the KM0832 Administrator Utility will not function correctly.

40