KA9233 User Manual

(continued from previous page)

Setting

Function

 

 

Change

Enter the old account password. Enter a new password, and then

Password

reenter the password to confirm it. Or, do not enter anything to

 

leave the password unchanged.

 

 

OSD Activation

Selects which hotkey combination is used to return to the Graphical

 

OSD from within the matrix KVM switch ports:

 

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

 

Since the Ctrl key combination may conflict with programs running

 

on the computers, the default is the Scroll Lock combination.

 

 

Set Logout

This function allows you to specify the number of minutes to elapse

Timeout

before an inactive user is timed out of the OSD. If there is no input

 

from the user for the specified amount of time, the user will be

 

logged out automatically. The valid range is from 1–180 minutes.

 

Enter 0 (zero) to disable the Logout Timeout function. This function

 

is disabled by default.

 

 

Screen Blanker

If there is no input from the console for the amount of time set with

 

this function, the screen is blanked. Key in a value from 1–30

 

minutes, and then press [Enter]. Enter 0 (zero) to disable the

 

Screen Blanker. This function is disabled by default.

 

 

Hotkey

Enables or disables Hotkey mode in case a conflict with programs

Command

running on the computers occurs. Hotkey mode is On by default.

 

(See Hotkey Mode, page 31.)

 

 

Set Beeper

When set to On, the KA9233 beeps when switching ports, when

 

activating Auto Scan mode (see page 23), when switching ports in

 

Auto Scan mode, when exiting Auto Scan mode, or when an invalid

 

entry is made on an OSD menu. The beeper is On by default.

 

 

Set Idle Timeout

If there is no input from the console accessing a particular port for

 

the amount of time set with this function, the port is released,

 

allowing it to be accessed by the other consoles. The valid range is

 

from 1–240 seconds. Enter 0 (zero) to disable the Idle Timeout

 

function. The default is 5 seconds.

 

 

Restore User

Restores the original factory default settings for View Mode (OSD),

Default

Set Port ID, Display Duration, Set Scan, OSD Activation, Set

 

Logout Timeout, Screen Blanker, Hotkey Command, Set

 

Beeper, and Set Idle Timeout.

1.Choose the settings you wish, and then click Save.

2.To exit without saving changes, click any other menu or icon.

28