ATEN Technology KH1508, KH1516 Stacking and Rack Mounting, Stacking

KH1508 / KH1516 User Manual

Stacking and Rack Mounting

The KH1508 / KH1516 can be stacked on the desktop or rack mounted at the front or rear of the rack. The following sections take you through the procedures for each method.

Stacking

The KH1508 / KH1516 can be placed on any appropriate level surface that can safely support its weight plus the weight of its attached cables. To place the KH1508 / KH1516, or to stack units if you are daisy chaining them, remove the backing material from the bottom of the rubber feet that came with this package, and stick them onto the switch’s bottom panel at the corners, as shown in the diagram, below:

Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and 12.7cm at the back for power cord and cable clearance.

10