ATEN Technology KH1508, KH1516 manual 37

Chapter 4. OSD Operation

(Continued from previous page.)

Setting	Function
PORT ID	Selects how the Port ID is displayed: the Port Number alone (PORT
DISPLAY	NUMBER); the Port Name alone (PORT NAME); or the Port Number
MODE	plus the Port Name (PORT NUMBER + PORT NAME). The default is
	PORT NUMBER + PORT NAME).
SCAN	Determines how long the focus dwells on each port as it cycles through
DURATION	the selected ports in Auto Scan Mode (see F7 SCAN, page 34). Key in
	a value from 1–255 seconds, then press [Enter]. Default is 5 seconds;
	a setting of 0 disables the Scan function.
SCAN/SKIP	Selects which computers will be accessed under Skip Mode (see F5
MODE	SKP, page 32), and Auto Scan Mode (see F7 SCAN, page 34).
	Choices are:
	ALL—All the Ports which have been set Accessible (see SET
	ACCESSIBLE PORTS, page 30);
	QUICK VIEW—Only those Ports which have been set Accessible and
	have been selected as Quick View Ports (see SET QUICK VIEW
	PORTS, page 30);
	POWERED ON—Only those Ports which have been set Accessible
	and are Powered On;
	QUICK VIEW + POWERED ON—Only those Ports which have been
	set Accessible and have been selected as Quick View Ports and are
	Powered On. The default is ALL.
SCREEN	If there is no input from the console for the amount of time set with this
BLANKER	function, the screen is blanked. Key in a value from 1–30 minutes, then
	press [Enter]. A setting of 0 disables this function. The default is 0
	(disabled).
HOTKEY	Enables / Disables the Hotkey function (see Keyboard Operation, page
COMMAND	37), in case a conflict with programs running on the computers occurs.
MODE
HOTKEY	This setting selects the Hotkey invocation keys (see Keyboard
	Operation, page 37). Choices are [NUM LOCK] + [-], or [CTRL] +
	[F12]. The default is [NUM LOCK] + [-].

27