ATEN Technology KH1508, KH1516 Administrator Login Failure

KH1508 / KH1516 User Manual

Administrator Login Failure

If you are unable to perform an Administrator login (because the Username and Password information has become corrupted or you have forgotten it, for example) you can clear the login information with the following procedure:

1.Power off the KH1508 / KH1516 and remove its housing.

2.Short the jumper labeled J8.

3.Power on the switch.

The on screen display will show a message informing you that the password information has been cleared.

4.Power off the switch.

5.Remove the jumper cap from J8.

6.Close the housing and start the KH1508 / KH1516 back up.

After you start back up, you can use the default Username and Password (see OSD Overview, page 21) to log in.

62