ATEN Technology KH1508, KH1516 manual 40

KH1508 / KH1516 User Manual

(F4 ADM continued)

Setting	Function
SET QUICK	This function lets the Administrator select which Ports to include as
VIEW PORTS	Quick View ports.
	Š To select/deselect a port as a Quick View Port, use the Navigation
	Keys to move the highlight bar to it, then press the [Spacebar].
	Š When a port has been selected as a Quick View Port, an arrowhead
	displays in the QV column of the LIST on the Main Screen to
	indicate so. When a port is deselected, the arrowhead disappears.
	Š If one of the Quick View options is chosen for the LIST view (see F2
	LIST, page 25), only a Port that has been selected here will display
	on the List.
	Š If one of the Quick View options is chosen for Auto Scanning
	(see SCAN/SKIP MODE, page 27), only a Port that has been
	selected here will be Auto Scanned.
	The default is for no ports to be selected.
SET	This function allows the Administrator to define User access to the
ACCESSIBLE	computers on the installation on a Port-by-Port basis.
PORTS	For each User, select the target Port, then press the [Spacebar] to
	cycle through the choices: F (Full access), V (View Only), or blank.
	Repeat until all access rights have been set, then press [Esc]. The
	default is F for all users on all Ports.
	Note: A blank setting means that no access rights are granted. The
	Port will not show up on the User's LIST on the Main Screen.
RESET	If you change the position of one of the Stations in the daisy chain, the
STATION IDS	OSD settings will no longer correspond to the new situation. This
	function directs the OSD to rescan the Station positions of the entire
	installation and updates the OSD so that the OSD Station information
	corresponds to the new physical layout.
	Note: Only the Station Numbers get updated. Except for the Port
	Names, all Administrator settings (such as Set Accessible Ports, Set
	Quick View Ports, etc.), for all of the computers affected by the change,
	have to be manually redone.
	(continues on next page)

30