KH1508 / KH1516 User Manual

F4 ADM

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it, then press [Enter].

After you select an item, a submenu with further choices appears. Double Click the choice you want, or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting

Function

 

 

SET

This function is used to set Usernames and Passwords for the

USERNAME

Administrator and Users:

AND

1. One Administrator and four User passwords can be set.

PASSWORD

2. After you select the Administrator field or one of the User fields, a

 

 

screen that allows you to key in your Username and Password

 

appears. The Username and Password may be up to 12 characters

 

long, and can consist of any combination of letters and numbers

 

(A–Z, a–z, 0–9).

 

3. For each individual, key in the Username and Password, then press

 

[Enter].

 

4. To modify or delete a previous Username and/or Password, use the

 

backspace key to erase individual letters or numbers.

 

 

SET

If there is no input from the console for the amount of time set with this

LOGOUT

function, the Operator is automatically logged out. A login is necessary

TIMEOUT

before the console can be used again.

 

This enables other Operators to gain access to the computers when

 

the original Operator is no longer accessing them, but has forgotten to

 

log out. To set the timeout value, key in a number from 1–180 minutes,

 

then press [Enter]. If the number is 0 (zero), this function is disabled.

 

Default is 0 (disabled).

 

 

 

(continues on next page)

28