Chapter 2.

Hardware Setup

Front Panel

1

2

3

4

1. Port LEDs

The upper Port LEDs are the On Line LEDs; the lower ones are the Selected Port LEDs:

MThe On Line LEDs light GREEN to indicate that the computer attached to the corresponding port is up and running. If the LED is flashing, it indicates that the Port is being used for cascading to another KH88 switch (see Two Stage Installation, p. 9).

MThe Selected LEDs light ORANGE to indicate that the computer attached to the corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see F7 SCAN, p. 27).

2.Port Selection Switches

Press a switch to access the computer attached to the corresponding port.

MPressing Buttons 1 and 2 simultaneously for 3 seconds performs a Keyboard and Mouse Reset.

MPressing 7 and 8 simultaneously starts Auto Scan Mode (see p. 27).

5