(F3 SET: continued)

Setting

Function

PORT ID

Determines how long a Port ID displays on the monitor after a port

DISPLAY

change has taken place. The choices are: User Defined - which

DURATION

lets you select the amount of time (from 1 - 255 sec.); and Always

 

On - which displays the Port ID at all times. If you select User

 

Defined, key in the number of seconds, then press [Enter]. The

 

default is 3 Seconds. A setting of 0 (zero) disables this function.

 

 

PORT ID

Selects how the Port ID is displayed: the Port Number alone (PORT

DISPLAY

NUMBER); the Port Name alone (PORT NAME); or the Port

MODE

Number plus the Port Name (PORT NUMBER + PORT NAME).

 

The default is PORT NUMBER + PORT NAME).

 

 

SCAN

Determines how long the focus dwells on each port as it cycles

DURATION

through the selected ports in Auto Scan Mode (see F7 SCAN, p.

 

27). Key in a value from 1 - 255 seconds, then press [Enter].

 

Default is 5 seconds; a setting of 0 disables the Scan function.

 

 

SCAN/SKIP

Selects which computers will be accessed under Auto Scan Mode

MODE

(see F7 SCAN, p. 27). Choices are:

 

ALL - All the Ports which have been set Accessible (see SET

 

ACCESSIBLE PORTS, p. 26);

 

POWERED ON - Only those Ports which have been set Accessible

 

and are Powered On;

 

QUICK VIEW - Only those Ports which have been set Accessible

 

and have been selected as Quick View Ports (see SET QUICK

 

VIEW PORTS, p. 26);

 

QUICK VIEW + POWERED ON - Only those Ports which have

 

been set Accessible and have been selected as Quick View Ports

 

and are Powered On.

 

The default is ALL.

 

Note: The Quick View choices only show up on an Administrator’s

 

screen, since only he has Quick View setting rights (see SET

 

QUICK VIEW PORTS, p. 26, for details).

 

 

SCREEN

If there is no input from the console for the amount of time set with

BLANKER

this function, the screen is blanked. Key in a value from 1 - 30

 

minutes, then press [Enter]. A setting of 0 disables this function.

 

The default is 0 (disabled).

 

 

HOTKEY

Enables / Disables the Hotkey function (see p. 29) in case a conflict

COMMAND

with programs running on the computers occurs. The default is

MODE

enabled.

 

 

23