F4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Note: All your setting changes are stored in temporary memory and remain in effect for the duration of your session. The changes only become permanent when you Log out of the OSD (see p. 28). If you shut down the KH88 without first logging out, your changes are discarded.

Setting

Function

SET

This function is used to set Usernames and Passwords:

USERNAME

 

AND

1. Usernames and Passwords for one Administrator and four

PASSWORD

Users can be set.

 

2. After you select one of the User fields or the Administrator field,

 

a screen that allows you to key in a Username and Password

 

appears. The password may be up to 15 characters long, and

 

can consist of any combination of letters and numbers

 

(A - Z, 0 - 9).

 

3. For each individual, key in the Username and Password, then

 

press [Enter].

 

4. To modify or delete a previous Username and/or Password,

 

use the backspace key to erase individual letters or numbers.

 

Note: To clear all Username and Password information and have

 

the Switch return to its default (empty) state, see Clear Login

 

Information, p. 47.

 

 

SET LOGOUT

If there is no input from the console for the amount of time set with

TIMEOUT

this function, the Operator is automatically logged out. A login is

 

necessary before the console can be used again.

 

This enables other Operators to gain access to the computers when

 

the original Operator is no longer accessing them, but has forgotten

 

to log out. To set the timeout value, key in a number from 1 - 180

 

minutes, then press [Enter]. If the number is 0 [zero], this function

 

is disabled. The default is 0 (disabled).

 

 

(Table continues on next page)

24