Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 25) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:
1.Invoke HKM (see p. 29)
2.Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
[Num Lock] + [*] or | [Port ID] [Enter] | Switches access to the computer that |
[Num Lock] + |
| corresponds to that Port ID. |
|
|
|
| [T] [n] [Enter] | Sets the Auto Scan interval to n seconds |
|
| - where n is a number from 1 - 255. |
|
|
|
| [A] | Invokes Auto Scan Mode. |
|
| When Auto Scan Mode is in effect, [P] or |
|
| Left Click pauses Auto Scanning. |
|
| When Auto Scanning is paused, pressing |
|
| Any Key or another Left Click resumes |
|
| Auto Scanning. |
|
|
|
| [←] | Invokes Skip Mode and Skips from the |
|
| current port to the first accessible port |
|
| previous to it. |
|
|
|
| [→] | Invokes Skip Mode and Skips from the |
|
| current port to the next accessible port. |
|
|
|
| [B] | Toggles the Beeper On or Off. |
|
|
|
| [R] [Enter] | Resets the KVM settings back to their |
|
| defaults. |
|
|
|
34 