Chapter 10. AP Operation
(Continued from previous page.)
A description of the Connection Screen is given in the following table:
Item | Description |
|
|
Menu Bar | The Menu Bar contains three items: File, Tools, and Help. |
| The File Menu allows the operator to Create, Save, and |
| Open user created Work files (see page 116 for details). |
| The Tools Menu contains two entries: Keyboard and |
| Config, (see page 116 for details). |
|
|
Server List | Each time the WinClient.exe file is run, it searches the User's |
| local LAN segment for KL9108 / KL9116 units, and lists |
| whichever ones it finds in this box. If you want to connect to |
| one of these units, |
|
|
Server | This area is used when you want to connect to a KL9108 / |
| KL9116 at a remote location. You can drop down the IP list |
| box and select an address from the list. If the address you |
| want isn't listed, you can key in the IP address you want. |
| Then, key in the Port number in the Port field. If you don't |
| know the Port number, then contact the Administrator. |
| When the IP address and Port number for the unit you wish to |
| connect to have been specified, Click Connect to start the |
| connection. When you have finished with your session, Click |
| Disconnect to end the connection. |
|
|
Message List | Lists status messages regarding the connection to the |
| KL9108 / KL9116. |
|
|
Switch to Remote View | Once contact with a KL9108 / KL9116 has been established, |
| this button becomes active. Click it to switch and take over |
| console control of the unit that is attached to the KL9108 / |
| KL9116. |
| The screen output of the unit appears on your monitor. Your |
| keystrokes and mouse movements are captured and sent to |
| the KL9108 / KL9116 to be executed on the attached unit. |
| If the KL9108 / KL9116 is connected to a KVM switch, you |
| can control the switch and the computers connected to it just |
| as if you were connected locally. |
|
|
Change Password | This button becomes active after a connection to a KL9108 / |
| KL9116 unit has been established. It allows the User to |
| change the password used to log in to the KL9108 / KL9116. |
|
|
115