Chapter 2. Hardware Setup
To rack mount the switch, do the following:
1.While one person positions the switch in the rack and holds it in place, the second person loosely screws the front brackets to the rack.
2.While the first person still holds the switch in place, the second person slides the L brackets into the switch's side mounting brackets, from the rear until the bracket flanges contact the rack, then screws the L brackets to the rack.
3. After the L brackets have been secured, tighten the front bracket screws.
Note: Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7 cm at the back for the power cord and cable clearance.
15