Chapter 6. Windows Client Port Operation
Before you Begin
Discussion of the Windows Client OSD begins on page 74, but the first time you run the program, you may want to make some display configuration changes. To do so, Click the curved Arrow icon on the Control Panel at the lower right of the remote display. a screen similar to the one below appears
There are three buttons: Config, Switch, and Exit. Their actions are described in the table, below:
Button | Action |
|
|
Config | Brings up the Graphics Configuration dialog box, which allows you |
| to set up the graphical environment. The Graphics Configuration |
| dialog box is discussed in the next section. |
|
|
Switch | Switches you to the Windows Client OSD. The Windows Client |
| OSD is discussed on page 74. |
|
|
Exit | Ends the program and closes the application. |
|
|
71