Appendix
Administrator Login Failure
If you are unable to perform an Administrator login (because the Username and Password information has become corrupted, or you have forgotten it, for example), you can clear the login information with the following procedure:
1.Power off the eco PDU and remove its housing.
2.Short the jumper labeled J1 (PIN5 and PIN6).
J1
3.Power on the eco PDU.
4.After the beep indicates successfully powered on, power off the switch.
5.Remove the jumper cap from J1.
6.Close the housing and start the eco PDU.
After you start, you can use the default Username and Password to log in.
96