eco PDU PE Series User Manual

User Information

Online Registration

Be sure to register your product at our online support center:

International http://eservice.aten.com

Telephone Support

For telephone support, call this number:

International

886-2-8692-6959

China

86-10-5255-0110

 

 

Japan

81-3-5615-5811

 

 

Korea

82-2-467-6789

 

 

North America

1-888-999-ATEN ext 4988

 

 

United Kingdom

44-8-4481-58923

 

 

User Notice

All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

PE Device Safety Notice

ŠSet the maximum permissible breaker protection in the building circuitry to the current rating specified on the rating plate. Observe all national regulations and safety codes as well as deviations for breakers.

ŠOnly connect the PE Device to a grounded power outlet or a grounded system!

ŠMake sure that the total current input of the connected systems does not exceed the current rating specified on the rating plate of the PE Device.

ŠThere is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the relevant instructions.

iii