Chapter 1. Introduction

 

 

 

 

 

 

 

 

 

No.

Item

Description

 

 

 

1

Power Outlets*

22 in total (19 x IEC320 C13 + 3 x IEC320 C19)

 

 

Bank 1-1: Outlet 1–14; 12 x C13 + 2 x C19

 

 

Bank 1-2: Outlet 15–22; 7 x C13 + 1 x C19

 

 

 

2

Port and LED Panel

The Port and LED panel contains:

 

 

Š Readout Section and LEDs

 

 

Š Sensor Ports

 

 

Š LAN Port

 

 

Š Door Sensor Port

 

 

Š Reset Switch

 

 

Full details of this section are provided on

 

 

page 23.

 

 

 

3

Circuit Breaker

As a safety measure, if there is an over current

 

Pushbutton

situation regarding the device’s power, the circuit

 

 

breakers will trip. Press the button to recover

 

 

normal operation.

 

 

Warning: See Resetting the Circuit Breaker,

 

 

page 79 for important information about resetting a

 

 

tripped circuit breaker.

 

 

 

4

Power Inlet

The power cord that connects the unit to an AC

 

 

power source plugs into this socket.

 

 

Š B models connect to a NEMA 6-20P (208V)

 

 

source

 

 

Š G models connect to an IEC 60320 C20 source

 

 

 

5

Outlet Status LEDs

These 8 LEDs indicate outlet status.

 

 

Lights ORANGE for powered on.

 

 

Off for powered off.

 

 

 

6

Output Power Indicator

This LED lights steady to indicate output power for

 

 

the related bank.

 

 

 

Note: Holes for ATEN Lok-U-Plug cable holders are located around the outlets. See Securing the Cables, page 35, for further information.

20