eco PDU PE Series User Manual

Features

Power Distribution

ŠSpace saving 0U rack mount design with rear mounting

ŠVarious IEC outlet models

Š2 digit 7-segment front panel LED shows PDU/Phase / Bank / Outlet ID

Š3 digit 7-segment front panel LED shows Current / Voltage / Power Dissipation, IP address, and readings from up to 4 environment sensors

ŠSafe shutdown support

ŠSeparate power for the unit's own power and its power outlets – the user interface is still accessible even when an overload condition trips the devices' circuit breaker

ŠDedicated 8/14-outlet bank for critical load devices (PE9 models only: PE9216/PE9324 8 outlets; PE9222/PE9330 14 outlets) – always powered on

ŠProactive overload protection (POP) (PE8 / PE9 models only) – automatically powers off the last outlet that caused the current overload (see Proactive Overload Protection (POP), page 7)

Remote Access

ŠRemote power control via TCP/IP and a built in 10/100 Ethernet port

ŠNetwork Protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, auto sense, Ping

ŠRemote users can monitor outlet status via web pages on their browsers

Šeco PDU Power Management software – eco Sensors

ŠSupports SNMP Manager V3

Operation

ŠLocal and Remote power outlet control (On, Off, Power Cycle) by individual outlets (PE8 / PE9 models)

ŠSupports multiple power control methods – Wake on LAN, System after AC Back, Kill the Power

ŠPower-on sequencing – set the power on sequence and delay time for each outlet to allow equipment to be powered on in the correct order

ŠEasy setup and operation via a browser-based user interface

ŠMultibrowser support (IE, Mozilla, Firefox, Chrome, Safari, Opera)

5