Chapter 1. Introduction

 

 

 

 

 

 

 

 

 

No.

Item

Description

 

 

 

1

Power Outlets*

16 in total (14 x IEC 320 C13 + 2 x IEC 320 C19)

 

 

Bank 1-1: Outlet 1–8: 7 C13; 1 x C19

 

 

Bank 1-2: Outlet 9–16: 7 x C13; 1 x C19

 

 

 

2

Port and LED Panel

The Port and LED panel contains:

 

 

Š Readout Section and LEDs

 

 

Š Environmental Sensor Ports

 

 

Š LAN Port

 

 

Š Door Sensor Port

 

 

Š Reset Switch

 

 

Full details of this section are provided on

 

 

page 23.

 

 

 

3

Circuit Breaker

As a safety measure, if there is an overcurrent

 

Pushbutton

situation regarding the device’s power, the circuit

 

 

breakers will trip. Press the button to recover

 

 

normal operation.

 

 

Warning: See Resetting the Circuit Breaker,

 

 

page 79 for important information about resetting a

 

 

tripped circuit breaker.

 

 

 

4

Power Inlet

The power cord that connects the unit to an AC

 

 

power source plugs into this socket.

 

 

Š B models connect to a NEMA 6-20P source

 

 

Š G models connect to an IEC 60320 C20 source

 

 

 

5

Outlet Status LEDs

PE8216 (x 16) and PE9216 (x 8) only.

 

 

These LEDs indicate outlet status.

 

 

Lights ORANGE for powered on.

 

 

Off for powered off.

 

 

 

Note: Holes for ATEN Lok-U-Plug cable holders are located around the outlets. See Securing the Cables, page 35, for further information.

14