ATEN Technology SN0108 / SN0116 manual 33

Chapter 4. Administration

ANMS

The Authentication Network Management Service dialog box allows you to set up login authorization management from external sources. It is divided into three main panels, as described below:

CC Management Settings:

If you want to allow authorization for the SN0108 / SN0116 through a CC (Control Center) server, check Enable CC Management and fill in the CC Server’s IP address and the port that it listens on in the appropriate fields.

RADIUS Settings:

If you want to allow authorization for the SN0108 / SN0116 through a RADIUS server, do the following:

1.Check Enable RADIUS.

2.Fill in the IP addresses and Service Ports for the Primary and Alternate RADIUS servers.

3.Key the Shared Secret character string that you want to use for authentication between the SN0108 / SN0116 and the RADIUS Server.

19