SN0108 / SN0116 User Manual

Finishing Up:

The SN0108 / SN0116's serial port settings and the computer's COM port settings must be the same. Change the SN0108 / SN0116's settings for the port you are connecting the computer to (see Port Config, page 26), so that they match the ones you just set in the dialog boxes (as shown in the table below):

Parameter

Value

 

 

Bit per second:

115200

 

 

Data bits:

8

 

 

Parity:

None

 

 

Stop bits:

1

 

 

Flow control:

Hardware (RTS/CTS)

 

 

Logging In:

1.Double click the icon you created in the Dial-up Network folder.

2.Key in your Username and Password, then click Connect.

3.Use Telnet, SSH, or your browser to access the SN0108 / SN0116 the same way as if you were accessing it over the net.

58