Chapter 4. Administration
Property Settings:
To set up the serial communications parameters for a port, select it, then click the Property Settings button at the bottom of the page:
The meanings of the settings are given in the following table:
Setting | Meaning | |
|
| |
Port ID | Each port on the SN0108 / SN0116 has a port ID number | |
| (COM1 - COM8 for the SN0108, or COM1 - COM16 for the | |
| SN0116). The Port ID field displays the number of the port | |
| that is being configured. | |
|
| |
Port Name | You can give a port an appropriate name by editing the Port | |
| Name field. | |
|
| |
Serial Parameters | The serial parameter fields allow you to set up the port so | |
(Data Bits - Out CRLF | that the SN0108 / SN0116 can communicate with the device | |
connected to it. Choose the parameters so that they match | ||
Translation) | ||
the ones for the connected device. | ||
| ||
|
| |
Suspend Character | The Suspend character is used to bring up the Suspend | |
| Menu in Telnet sessions (see Telnet, page 41). | |
|
| |
| (Continues on next page.) |
27