Athena Technologies OTC25 N instruction manual OTC25-NOTC25-POTC25-L

Keep This Information in a Safe Place

Configured Parameters Reference Information

Series OTC25 Temperature Controller

Model Number:	_____________________
Zone Location:	_____________________
Firmware Version No. :		_______________

(Displayed when the controller is powered up after all the segments on both lines of the display have been tested).

Dear Customer:

Please keep this information handy - in case your controller should lose its configured initial parameter values or for easy refer- ence when setting up a new controller. After auto-tuning, and when your controller is controlling well, we suggest you write the displayed value for each of the menu parameters listed below. If you do not use a listed parameter, indicate “N/A”. Using this page to document your parameter settings could reduce your downtime.

If you have any questions, or need further assistance, please contact Athena Controls Technical Support:

Toll-free (in U.S.): 800.782.6776

Telephone: 610.828.2490

Fax: 610.828.7084

E-Mail: sales@athenacontrols.com

Web: www.athenacontrols.com

OTC25-NOTC25-POTC25-L

19