Step 2. On the remote control, press the button that is to be erased. The orange Status LED will flash continuously and the Device button will turn off.
Step 3. Press the LIGHT button. The green status LED will flash twice, then turn to a steady orange. The Device button will turn on.
Repeat from Step 2 for any other buttons to be erased in the selected Device mode.
Step 4. To exit this feature, press and hold the Device button and the SELECT button simultaneously, once again. The orange Status LED will flash twice and then turn off. The Device button will turn off.
To Erase All the Learned Commands in One Device Mode
Step 1. Press the Device button and SELECT buttons simultaneously, and hold until orange Status LED and the Device button turn on and remain lit.
Step 2. Press and hold the LIGHT button. The red Status LED will flash five times. Release the LIGHT button. The Status LED will then flash green twice and then the Device button will turn off. The Status LED will go to a constant orange indicating that all the learned information on buttons in the Device mode have been erased. The Device button will turn on.
Step 3. To exit this feature, press and hold the Device button and the SELECT button simultaneously. The orange Status LED will flash twice and then turn off. The Device button will turn off.
To Erase All the Learned Commands in All Device Modes
Warning: This procedure will erase all learned commands on all buttons
in the CD, DVD, AUX, SAT, TV,VCR and CBL device modes.
Step 1. Press and hold the TV Device button and the LIGHT button simultaneously. The red Status LED will flash continuously. The Status LED will then flash green once, orange once then turn off, indicating that all of the learned commands on all of the Device modes on the remote control have been erased.
Volume Punch Through
The user can have the Audio Volume control (Volume UP, DOWN and MUTE) operate in any of the eight Device modes.
Step 1. Press the Device and MUTE buttons, simultaneously.
Step 2. Press the Volume UP button.
Step 3. Press the AVC device button to select the type of volume control you wish to operate in that mode.
Example: If you wish to have the AVC volume operate in the DVD mode, press the DVD Device button in Step 1. of the instructions and the AVC Device button in Step 3.
Page 20
