Safety Instructions
NOTE FOR INSTALLATION: The ATP 8500 generates a certain amount of heat and requires ventilation. Do not place it on a soft surface such as a rug into which it could sink. You should also avoid a
WARNING: MOISTURE IS DANGEROUS FOR THIS DEVICE AND FORMS A HAZARD OF FIRE OR ELECTRIC SHOCK. IF LIQUID IS ACCIDENTALLY SPILLED ON IT, IMMEDIATELY SHUT OFF ITS POWER AT THE WALL OUTLET BY UNPLUGGING THE AC POWER CORD. ALLOW SUFFICIENT TIME FOR COMPLETE EVAPORATION BEFORE USING THE PREAMPLIFIER AGAIN. IF THE LIQUID IS ANY OTHER THAN WATER AND/OR ALCOHOL, DO NOT USE THE DEVICE BEFORE A QUALIFIED SERVICE TECHNICIAN HAS EXAMINED IT.
DANGER: Do not open the cover, or try to modify or repair the preamplifier yourself. All servicing must be done by a qualified technician.
IMPORTANT: USE A DAMP CLOTH TO CLEAN THE MONITOR. NEVER USE ABRASIVES OR SOLVENTS ON THE MONITOR. NEVER SPRAY LIQUIDS DIRECTLY ON THE MONITOR.
Read all the safety and operating instructions before connecting or using this unit. All warnings on the unit and in this operating manual should be adhered to. All operating and use instructions should be followed.
The unit should be connected to a
The unit should be serviced by qualified service personnel when: A. The power cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the unit; or C. The unit has been exposed to rain, or liquids of any kind; or
D. The unit does not appear to operate normally, or exhibits a marked change in performance; or E. The device has been dropped, or the enclosure damaged.
Rack Mounting
Your
CAUTION: THE RACK MOUNT PANEL CANNOT SUPPORT THE WEIGHT OF YOUR PREAMPLIFIER- PROCESSOR. BE SURE TO MOUNT THE UNIT ON A STRONG,
Page 5