Owner’s Manual
Sequencer Controller
Front Panel Description
6 |
| 6 |
|
| 2 |
|
| 3 |
6 |
| 6 |
4 | 5 | 1 |
1.System Activation Switch - Press to activate the ON or OFF sequence.
2.System Activation Switch Security Cover - If you do not want to use the Front Panel Activation
Switch, place the security cover over the switch and secure using the retainer screw.
3.Power LED - Illuminates Blue when 24VDC power is present.
4.System Status/Ready LED - Flashes Green during a sequence and will illuminate steadily when sequence is complete indicating the system is powered up. When the LED is Off, it indicates the system is in the Off mode.
5.Channel Output LED - Each of the 6 outputs have their own LED which illuminates Red when the specific channel / output is active.
6.Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening the screws.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 3 – | AtlasSound.com |
Specifications are subject to change without notice.
