| Example1: To transfer video and audio signals from input channel No.7 to all output |
| channels |
| Operation: Press buttons in this order “7”, “ALL” |
| Note: This command need not follow by “END” & “ENTER” |
| Example2: To transfer all input signals to the corresponding output channels |
| respectively. In another word, to switch to this status: |
| Operation: Press buttons in this order “ALL”, “1” |
| Example3: To switch off all the output channels |
| Operation: Press buttons in this order “ALL”, “2” |
“SAVE” | Save button: To save the present operation to a preset command |
| Example: To save the present operation to the preset command No.2 |
| Operation: Press buttons in this order “SAVE”, “2” |
| Note: There are altogether 10 preset commands ranged from No.0 to No.10. |
“RECALL” Recall button: To recall the preset command | |
| Example: To recall the preset command No.2 |
| Operation: Press buttons in this order “RECALL”, “2” |
“CANCEL” Cancel button: To return to the standby status without performing any command | |
| Example: To cancel the input instructions “1”, “AV”, “2”, “END” |
| Operation: Just press button“CANCEL” after the above inputs |
“STATUS” | Inquiring status button: To inquire the present status |
| Example1: To inquire the status of output channel No.7 |
Operation: Press buttons in this order “7”, “STATUS”
Example2: To inquire the status of all the output channels one by one
Operation: Press only the button “STATUS”
Atlona Technologies | www.atlona.com | 18 |
