4.2 Additional Controls for AV32, AV48, AV64, AV96, AV128
“UNDO” | Undo button: To resume to the status before the command just performed |
“PROGRAM” Group programming button: To define, recall and clear a group of output channel Example1: To group the output channels No.1,2,3,4,5 under the Group1
Operation: Press buttons in this order “1”, “Program”, “Program”, “1”, “2”, “3”, “4”, “5”
Example2: To transfer signals from input channel No.1 to Group2
Operation: Press buttons in this order “1”, “Program”, “2”
Example3: To clear the output channels under Group1
Operation: Press buttons in this order “1”, “Program”, “0”
Note: Please clear the group to be set before grouping it.
“ ← ” | Backspace button: To backspace the latest input button |
| “THROUGH” Through button: To transfer the signals directly to the corresponding output |
| channels |
| Example: To transfer the signals from input channels No.1,2,3 to their corresponding |
| output channels |
| Operation: Press buttons in this order “1”, “/”, “2”, “/”, “3”, “THROUGH” |
“CLOSE” | Close button: To switch off the output channels |
| Example: To switch off the output channels No.1,2 |
| Operation: Press buttons in this order “1”, “END”, “2”, “END”, “CLOSE” |
“LOCK” | Lock button: To lock buttons on the front control panel by pressing it for 3 seconds |
| Note: When the control panel is being locked, the switcher still can be control via the |
| RS232 port. To unlock it, a password is needed. |
“DEMO” | Demo button: To demonstrate the commands one by one every 3 seconds. |
Atlona Technologies | www.atlona.com | 19 |
