1.0 Safety Operation Guide
***************************************************************
In order to ensure the credibility and the user’s safety, please comply with the fol- lowing items during installation, maintenance and operation of the switch.
1)The switch must be in stable position. Use only the power supply that comes with unit. Do not use an alternate as it may damage it.
2)Do not place the switcher near hot or cold surfaces or sources.
3)To avoid any damage by over heating, please keep the environment in good ventilation to radiate the heat when running the switcher.
4)The switcher should be turned off when it is not used.
5)Please do not attempt to take cover off the switcher for there is a
6)Do not splash any liquid or chemical on or near the equipment.
7)Please make sure all the wiring are in working condition and are not cut or damaged.
1.1Notice
*******************************************************************
This VGA Switchers User Manual can be used for other VGA matrix switcher models. This manual is only an instruction for operators, not for any maintenance usage. Any changes of functions and parameters since then will be informed sepa- rately. This manual is copyright Atlona Technologies. All rights reserved. No part of this publication may be copied or reproduced without the prior written consent of Atlona Technologies.
Please check Atlona website updates.
http://www.Atlona.com
Atlona Technologies | www.atlona.com | 3 |
