ATON DHSIP manual Source Connections

DHSIP Source Input Wall Plate

3. Connections

Connections for the DHSIP consists of:

1.Source Connections - Front

2.DHTP1 Amplified Touch Pad Connections - Rear

3.DH46X Digital Audio Router - Rear

Source Connections

Sources are connected to the DHSIP in one of three ways:

1.Analog

2.Digital Coaxial

3.Digital Optical

For best sound quality, use one of the Digital connec- tion methods if the Source has this type of output. For sources that do not have Digital outputs, use the Analog option.

Note 1: Make sure that the DHSIP’s Source Input Switch is correctly set for the type of connection used.

Note 2: Multi-channel digital audio formats (5.1, 7.1, etc.) are not supported by the DHSIP. Most audio/video sources allow you to change the digital output to PCM Stereo. In most cases, this will allow multi-channel au- dio sources to output a “summed” stereo signal through the digital output. Consult the audio/video source manual for details.

Note 3: Some audio sources which utilize a digital output require that you enable the digital output before it will function. If there is no audio present, check the setup menu of the audio source to confirm that the digital output is enabled.

© 2008 • All rights reserved. 9