ATON DHSIP manual Wiring/Installation, 568A Wiring Standard

DHSIP Source Input Wall Plate

2. Wiring/Installation

Wiring for the DHSIP consists of a single run of Cat-5 wire between the DHTP1 Amplifi ed Touch Pad or DH46X Digital Audio Router and the mounting loca- tion for the DHSIP.

Note: Do not run Cat-5 wires closer than 12" from high voltage wires.

T-568A Wiring Standard

All Cat-5 connections in a DH44-based system use the industry standard T-568A wiring scheme as il- lustrated in Figure 2.1. RJ-45 connectors are used to terminate Cat-5 wires at both ends.

1 2 3 4 5 6 7 8

Shown tab down

1 2 3 4 5 6 78

GREEN/WHITE GREEN ORANGE/WHITE BLUE BLUE/WHITE ORANGE BROWN/WHITE BROWN

Figure 2.1: T-568A Wiring Standard

© 2008 • All rights reserved. 7