DHSIP Source Input Wall Plate

Safety Information

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifi cations not expressly approved by ATON could void the user’s authority to operate the equipment

Clean only with a dry soft cloth.

It is important to properly care for your DHSIP. Follow these guidelines to ensure your device is preserved and protected.

Do not expose the DHSIP to rain, liquids or moisture for an extended period of time.

Do not expose the DHSIP to temperature extremes.

Operating Temperatures & Environments

Operating Temperature: 32-104°F (0-40° C)

Humidity: 0-90%

© 2008 • All rights reserved.

1

Page 3
Image 3
ATON DHSIP manual Safety Information, Operating Temperatures & Environments