![](/images/new-backgrounds/1192360/19236039x1.webp)
DHSIP Source Input Wall Plate
Adjusting Analog Audio Source Output Level
Once all connections are made, the Analog Audio Source should be adjusted for clipping (distortion) before the DHSIP is mounted in place.
To adjust the Analog Audio Source Output Level:
1.Ensure that the Analog Audio Source is connected properly.
2.Power up the source and turn on an audible signal (Press PLAY, tune to a station, etc.).
3.Select the Source from the zone’s DHTP1 Touch- pad. If it is a Local Source connected to a DHTP1, select LOCAL. If it is a System Source connected to a DH46X, select the appropriate Source Input on the Zone’s DHTP1.
4.Adjust the zone’s volume to a normal, comfort- able listening level.
5.Observe the CLIP LED on the front of the DHSIP. If it lights up constantly or consistently, the source’s output level is too high and needs to be adjusted.
6.Adjust the GAIN DIP switches according to the following table:
18 | ©2008 • All rights reserved. |