![](/images/new-backgrounds/1192360/19236029x1.webp)
DHSIP Source Input Wall Plate
IR OUT
Connect a standard IR Emitter (ATON AIE2, for exam- ple) from the IR OUT port on the front of the DHSIP to the IR receiver on the front of the audio source (see Figure 3.4). For sources that have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead (see Figure 3.5).
DHSIP Front
AIE2
Emitter
CD
Figure 3.4: IR OUT to Local Source - IR Emitter
© 2008 • All rights reserved. | 13 |