Tuner
Station Preset Memory
1)Select a band and tune to the desired radio station you wish to store in the preset memory
2)Press and hold a Preset number [1 through 6] button for a second to store the station in that preset slot.
Automatic Seek and Preset Memory Mode (Auto Store)
1)Press and hold the [AST] button for a second to start Auto Store
2)The tuner will automatically seek and store 6 strong stations in FM3/AM2(AM)/LW/MW mode in the order of signal strength. When the automatic memory has been completed,the tuner goes to the frequency of first preset number of the stored preset number series.
N O T E The last band of each Tuner mode (FM3/AM2(AM)/LW/MW) is used for Auto Store PresetTuner modes vary by location and are factory set according to the area where the unit is sold
Programmable Station Memory
The name of a station can be stored in memory using up to 12 characters as a title. Each of the 30 preset stations can be programmed with their own name.
Programming Station Title Memory
1)Press and hold the [Band/Menu] button after tuning the station to be titled, the “NAMESET” is displayed for a second and a
2)Turn the Rotary Encoder to select desired characters.
3)Press the [<<] or [>>] buttons to move the cursor position.
4)Press the desired Preset Number [1~6] button for more than a second to store the
station and title at the selected preset.
Erasing Station Name
1)Press and hold the [ENTER] button when Station Title is displayed.
2)Press the [ENTER] button again when Station Title is flashing. The Station frequency will be displayed automatically if the Station Title is erased properly.
27
