Audiovox ACD-84 Operating Instructions / Setting the Clock / Error Codes, CD Player Error Codes

OPERATING INSTRUCTIONS / SETTING THE CLOCK / ERROR CODES

11

DISC SLOT

MOTORIZED FOLD-DOWN

FRONT PANEL

FRONT PANEL

RELEASE TAB

THEFT-DETERRENT LED AND RESET BUTTON (BEHIND FRONT PANEL)

SETTING THE CLOCK

1.Switch the vehicle ignition and radio “on”.

2.Press the Time/Frequency (T/F) button to call the time display.

3.While holding the T/F button in, press the Down TUNE/SEEK/TRACK ( - ) button to adjust the hours and AM/PM indication, or the Up TUNE/SEEK/TRACK ( + ) button to adjust the minutes to the correct time.

4.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the normal indication.

CD PLAYER ERROR CODES

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button cuon the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.