USING THE CD PLAYER
1.Set the FUNCTION switch to CD. "
" is shown in the display.
2.Open the CD door, "
" is shown, insert a CD into the tray with the printed label facing up. Close the CD door by pressing the lid gently. The total track no. will be shown a few 
seconds.
3. Use the SKIP 
/
buttons to choose a track.
4.Press PLAY/PAUSE 
button to begin play. The PLAY/PAUSE indicator will light up.
5.Press STOP 
button to stop disc play.
NOTE: The display will be returned to clock about 10 seconds.
PAUSING CD PLAY
1. | Press the PLAY/PAUSE |
|
|
|
|
|
|
|
| button while |
|
|
| ||||||||
| a CD is playing to pause play. The TRACK | |||||||||
| NO. indicator will flicker. |
| ||||||||
2. | Press the PLAY/PAUSE |
|
|
|
| button again to continue play. | ||||
|
| |||||||||
|
| |||||||||
REPEATING PLAY
• Press the REPEAT ONE•ALL button once during playback, the REPEAT ONE indicator will light up.
For RADIO and CD alarm
First tune in the desired station or select the desired track in CD, adjust the volume. Slide the ALARM/POWER switch to CD/RADIO mode. The ALARM indicator will light up.
For buzzer alarm
Slide the ALARM/POWER switch to BUZZER. The Alarm indicator will light up.
Note:
Slide to CD/RADIO or BUZZER mode, the alarm will stop at once.
Cancel the Alarm 1
Slide the ALARM/POWER switch to STANDBY.
Cancel the Alarm 2
Hold the ALARM 2 and press the CLOCK SET buttons again, the alarm 2 setting will be cancelled.
HOW TO TURN OFF THE ALARM
1. If you want to snooze a few more minutes |
Pressing the SNOOZE button will deactivate the sound for 9 minutes. |
You can repeat this function as many times as desired within 119 |
minutes from the preset alarm time. |
2. To reset alarm for following day |
Press the ALARM 1 or ALARM 1 and ALARM 2 buttons, and it will |
resume after 24 hours. |
3. To cancel alarm mode |
Press the ALARM 1 or ALARM 2 button. |
It's important that you periodically clean |
|
the laser lens: |
|
1. Turn off the unit's power and disconnect |
|
the AC power. |
|
2. Open the CD door and remove the disc. |
|
3. Clean the lens with a soft cloth or use |
|
an air blower brush designed for | Laser lens |
cameras. | |
4. If you still are not able to remove dirt |
|
particles, moisten a cotton swab with |
|
isopropyl alcohol and gently apply to |
|
the face of the laser lens, rubbing gently |
|
until all traces of dirt are removed. |
|
TROUBLE SHOOTING GUIDE
CD
Problems | Solutions |
System does not turn | • Make sure the ALARM/POWER switch is |
on | set to ON position |
Disc in place but unit | • Make sure the FUNCTION switch is set to |
won't play | CD position. |
| • Make sure disc is clean and undamaged. |
| • Make sure printed side of disc is facing |
| up. |
RADIO | • Make sure PAUSE mode is not activated. |
|
• Press the REPEAT ONE•ALL button a second time to repeat all tracks, the REPEAT ALL indicator will flicker.
• Press the REPEAT ONE•ALL button until the REPEAT indicator is turned off.
NOTE: The display will be returned to clock about 10 seconds.
WAKE UP TO ALARM (RADIO, BUZZER OR CD)
The radio, buzzer or CD automatically sounds at the designated time every day.
You can set two different alarm times, one in ALARM 1 and one in ALARM 2, so that the alarm timer operates twice a day.
Set ALARM 1
1. Slide the ALARM/POWER switch to CD/
RADIO or BUZZER mode. The ALARM |
|
1 indicator will light up. | 1 |
2.Hold the ALARM 1 and press the HOUR buttons to the desired hour.
3.Hold the ALARM 1 and press the MIN buttons to the desired minute.
HOW TO SET THE SLEEP TIMER
Before setting
•Set the clock (see HOW TO SET THE CLOCK). If the clock is not set, you cannot set alarm times
1.Slide the ALARM/POWER switch to STANDBY mode. Set the FUNCTION switch to the desired source.
2.Press the SLEEP button.
3.The radio or CD will automatically turn off after 59 minutes.
To adjust the length of time before the radio or CD automatically
turns off.
Hold down the SLEEP button while pressing the MIN or HOUR
button. The SLEEP timer can be adjusted to between 1 and 119 minutes.
To turn off the radio or CD before the SLEEP time expires. Press the SNOOZE button.
CARE AND MAINTENANCE
GENERAL GUIDELINES
• Do not touch the laser lens on the CD player. |
• Temperature changes can cause condensation to form on the laser lens. |
If condensation forms on the lens, leave the disc compartment door |
open (without disc) for an hour to remove condensation. |
Problems
Poor FM reception
Poor AM reception
CLOCK
Problems
Clock does not show the correct time
Alarm does not come on at the preset time.
Solutions
• Make sure FM antenna wire is fully extended.
• Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers).
• Reposition or turn the unit for better reception.
Solutions
• There has been an electrical power interruption. (Is the figure of the time display flickering?)
To turn on the CD, RADIO or BUZZER alarm, check the following points:
• Is the current time correctly set on the time display? Check the AM/PM indication.
• Is the alarm time correctly set? Check the AM/PM indication.
• Is the FUNCTION switch correctly set to FM, AM or CD?
• Is the desired station or song tuned in?
Set ALARM 2 |
|
|
You must set ALARM 1 first, then ALARM 2 can be set. |
| |
1. Slide the ALARM/POWER switch to CD/ |
|
|
RADIO or BUZZER mode. |
|
|
2. Hold the ALARM 2 and press the CLOCK | 1 | 2 |
SET buttons. The ALARM 1 and 2 |
|
|
indicators will light up.
3.Hold the ALARM 2 and press the HOUR buttons to the desired hour.
4.Hold the ALARM 2 and press the MIN buttons to the desired minute.
• Exposure to direct sunlight or extreme heat (such as inside a car parked |
in the sun) can cause damage or malfunction. |
• To prevent dust from reaching internal parts, keep the compartment |
door close when not using (except when necessary to remove |
condensation). |
HANDLING THE COMPACT DISC
Although the music tracks in the disc are covered with a protective layer, it is still advisable to treat the disc carefully. Always pick up discs by the edge and put them back in their holders immediately after use.
|
| SPECIFICATIONS |
Power output: | Max. 500mW | |
Power requirements: AC~120V 60Hz
DC 9V (6F22 x1)
Specification subjects to change without notice.
Printed in China |
